PRODUCTS — DISPOSABLE-HEAD TOOLS
SMR Disposable-Head Tools
One shank, dozens of heads. The SMR system pairs hardened HSS or solid carbide shanks with disposable heads from Ø12 to 32 mm — reducing your cost per edge by up to 500% and keeping changeovers to seconds.
- Ø12–32 mm head range
- 9+ interchangeable head styles
- 3–6 teeth per head for higher feed
One Shank. Dozens of Heads.
SMR disposable-head tools are built around a single shank that accepts dozens of head shapes. When an edge wears, you replace only the head — not the whole tool — and you are back in the cut in seconds.
- Heads from Ø12 to 32 mm — chamfer, radius, chamfer mill, and high-feed styles
- HSS shanks hardened to 50 HRC; solid carbide shanks available
- Is interface for fast, secure clamping — no dialing, no guesswork
- 3 to 6 teeth per head for higher feed rates
Four Head Families, One System
Nine-plus head shapes cover chamfering, corner-radius milling, and high-feed applications.
Chamfer Heads (C06/C10)
45° chamfer heads for clean edge breaks. Ø16–25 mm, 4 cutting edges.
Radius Heads (R00–R30)
Corner-radius heads from R0 to R30 for profile milling. Ø12–25 mm, 4 cutting edges.
Chamfer Mills (A30–60°)
Chamfer mill heads at 30°, 45°, and 60° with 3 or 6 flutes. Ø12–20 mm.
High-Feed Heads (HV)
High-feed heads with radii R3–R40 for fast roughing. Ø12 mm, 4 cutting edges.
Shanks: SMRSD series, Ø12–25 mm, lengths L70–L250, connections T08–T15 · Custom head shapes available on request.
Why Machinists Choose SMR
Up to 500% Lower Cost per Edge
Replace the head, not the tool. Disposable heads slash tooling spend versus solid cutters.
Dozens of Heads on One Shank
One shank accepts dozens of head shapes within its size range — simplify your tool crib.
Higher Feeds, Faster Cycles
3–6 teeth per head let you push feed rates and shorten cycle times.
Hardened Shanks
HSS shanks hardened to 50 HRC; solid carbide shanks for maximum rigidity.
Change over in Seconds
The Is interface clamps fast and secure — swap heads without removing the shank.
Built for High-Speed Cutting
Stable in high-speed milling across steel, stainless, cast iron, and non-ferrous metals.
Specifications at a Glance
- Head diameters: Ø12 – 32 mm
- Head styles: chamfer (C06/C10) · radius (R00–R30) · chamfer mill (30°/45°/60°, 3–6 flutes) · high-feed (R03–R40)
- Teeth: 3 – 6 per head
- Shanks: HSS 50 HRC or solid carbide · Ø12–25 mm · L70–L250 · T08–T15
- Interfaces: Is / Mi
- Custom head shapes: available on request
Frequently Asked Questions
A hardened shank holds a disposable head clamped through the Is interface. When the edge wears out, replace the head in seconds and keep cutting.
Chamfer (C06/C10), corner radius (R00–R30), chamfer mill (30°/45°/60°), and high-feed (HV) heads — nine-plus shapes from Ø12 to 32 mm. Custom shapes are available on request.
Steel, stainless steel, cast iron, and non-ferrous metals — in mold and die work and general machining at high cutting speeds.
No. One shank accepts dozens of head shapes within its size range, which keeps your tool crib small and your inventory simple.
Please contact us for current MOQ and lead times — we reply within 1 business day with pricing and availability.
Yes. Send your drawing (PDF / DWG / STEP) and we will confirm feasibility within 48 hours.
Ready to Cut Your Tooling Costs by Up to 500%?
Tell us what you are machining and we will recommend the right head and shank combination — with pricing within 1 business day.
sales@winveratools.com