WVR MI CH Chamfer Heads
MI chamfer heads. Choose the cutting diameter and KAPR angle from the model table.
Model Specifications
| Model | DC (mm) | KAPR (°) | APMX (mm) | LH (mm) | DCONMS (mm) | Z |
|---|---|---|---|---|---|---|
| WVR12CH3L120A30-K | 12 | 30° | 12 | 18 | 11.7 | 3 |
| WVR12CH3L120A45-K | 12 | 45° | 12 | 18 | 11.7 | 3 |
| WVR12CH3L120A60-K | 12 | 60° | 12 | 18 | 11.7 | 3 |
| WVR12CH6L120A30-K | 12 | 30° | 12 | 18 | 11.7 | 6 |
| WVR12CH6L120A45-K | 12 | 45° | 12 | 18 | 11.7 | 6 |
| WVR12CH6L120A60-K | 12 | 60° | 12 | 18 | 11.7 | 6 |
| WVR16CH3L160A30-K | 16 | 30° | 16 | 24 | 15.5 | 3 |
| WVR16CH3L160A45-K | 16 | 45° | 16 | 24 | 15.5 | 3 |
| WVR16CH3L160A60-K | 16 | 60° | 16 | 24 | 15.5 | 3 |
| WVR16CH6L160A30-K | 16 | 30° | 16 | 24 | 15.5 | 6 |
| WVR16CH6L160A45-K | 16 | 45° | 16 | 24 | 15.5 | 6 |
| WVR16CH6L160A60-K | 16 | 60° | 16 | 24 | 15.5 | 6 |
| WVR20CH3L200A30-K | 20 | 30° | 20 | 30 | 19.5 | 3 |
| WVR20CH3L200A45-K | 20 | 45° | 20 | 30 | 19.5 | 3 |
| WVR20CH3L200A60-K | 20 | 60° | 20 | 30 | 19.5 | 3 |
| WVR20CH6L200A30-K | 20 | 30° | 20 | 30 | 19.5 | 6 |
| WVR20CH6L200A45-K | 20 | 45° | 20 | 30 | 19.5 | 6 |
| WVR20CH6L200A60-K | 20 | 60° | 20 | 30 | 19.5 | 6 |
| WVR25CH3L250A30-K | 25 | 30° | 25 | 38 | 24.5 | 3 |
| WVR25CH3L250A45-K | 25 | 45° | 25 | 38 | 24.5 | 3 |
| WVR25CH3L250A60-K | 25 | 60° | 25 | 38 | 24.5 | 3 |
| WVR25CH6L250A30-K | 25 | 30° | 25 | 38 | 24.5 | 6 |
| WVR25CH6L250A45-K | 25 | 45° | 25 | 38 | 24.5 | 6 |
| WVR25CH6L250A60-K | 25 | 60° | 25 | 38 | 24.5 | 6 |
| WVR25CH3L320A30-K | 32 | 30° | 32 | 48 | 24.5 | 3 |
| WVR25CH3L320A45-K | 32 | 45° | 32 | 48 | 24.5 | 3 |
| WVR25CH3L320A60-K | 32 | 60° | 32 | 48 | 24.5 | 3 |
| WVR25CH6L320A30-K | 32 | 30° | 32 | 48 | 24.5 | 6 |
| WVR25CH6L320A45-K | 32 | 45° | 32 | 48 | 24.5 | 6 |
| WVR25CH6L320A60-K | 32 | 60° | 32 | 48 | 24.5 | 6 |
Overview
Application Data
Overview
CH Chamfer Heads
MI chamfer heads. Choose the cutting diameter and KAPR angle from the model table.
Use a MI-interface tool shank with the matching connection designation.
Application Data
Geometry and working dimensions
| Parameter | Values |
|---|---|
| DC (mm) | 12–32 |
| KAPR (°) | 30°, 45°, 60° |
| APMX (mm) | 12–32 |
| LH (mm) | 18–48 |
| DCONMS (mm) | 11.7–24.5 |
| Z | 3–6 |
Accessories
