Model Specifications
| Model | DC (mm) | RE (mm) | CE (mm) | LC (mm) | TH | D1 (mm) | LF (mm) |
|---|---|---|---|---|---|---|---|
| WVRE160L24C06-Z4-T10 | 16 | 0.6 | 24 | T10 | 15.3 | 32 | |
| WVRE160L24C10-Z4-T10 | 16 | 1.0 | 24 | T10 | 15.3 | 32 | |
| WVRE160L24R00-Z4-T10 | 16 | 24 | T10 | 15.3 | 32 | ||
| WVRE160L24R05-Z4-T10 | 16 | 0.5 | 24 | T10 | 15.3 | 32 | |
| WVRE160L24R10-Z4-T10 | 16 | 1 | 24 | T10 | 15.3 | 32 | |
| WVRE160L24R20-Z4-T10 | 16 | 2 | 24 | T10 | 15.3 | 32 | |
| WVRE160L24R30-Z4-T10 | 16 | 3 | 24 | T10 | 15.3 | 32 | |
| WVRE200L30C06-Z4-T12 | 20 | 0.6 | 30 | T12 | 18.3 | 38 | |
| WVRE200L30C10-Z4-T12 | 20 | 1.0 | 30 | T12 | 18.3 | 38 | |
| WVRE200L30R00-Z4-T12 | 20 | 30 | T12 | 18.3 | 38 | ||
| WVRE200L30R05-Z4-T12 | 20 | 0.5 | 30 | T12 | 18.3 | 38 | |
| WVRE200L30R10-Z4-T12 | 20 | 1 | 30 | T12 | 18.3 | 38 | |
| WVRE200L30R20-Z4-T12 | 20 | 2 | 30 | T12 | 18.3 | 38 | |
| WVRE200L30R30-Z4-T12 | 20 | 3 | 30 | T12 | 18.3 | 38 | |
| WVRE250L38C06-Z4-T15 | 25 | 0.6 | 38 | T15 | 23.9 | 46 | |
| WVRE250L38C10-Z4-T15 | 25 | 1.0 | 38 | T15 | 23.9 | 46 | |
| WVRE250L38R00-Z4-T15 | 25 | 38 | T15 | 23.9 | 46 | ||
| WVRE250L38R05-Z4-T15 | 25 | 0.5 | 38 | T15 | 23.9 | 46 | |
| WVRE250L38R10-Z4-T15 | 25 | 1 | 38 | T15 | 23.9 | 46 | |
| WVRE250L38R20-Z4-T15 | 25 | 2 | 38 | T15 | 23.9 | 46 | |
| WVRE250L38R30-Z4-T15 | 25 | 3 | 38 | T15 | 23.9 | 46 |
Overview
Application Data
Overview
E Milling Heads
End-milling heads with corner radii or chamfers.
Use a LS-interface tool shank with the matching connection designation.
Application Data
Geometry and working dimensions
| Parameter | Values |
|---|---|
| DC (mm) | 16–25 |
| RE (mm) | 0.5–3 |
| CE (mm) | 0.6–1 |
| LC (mm) | 24–38 |
| TH | T10, T12, T15 |
| D1 (mm) | 15.3–23.9 |
| LF (mm) | 32–46 |