WV3020
Coated grade listed for WVU inserts.
| Model | d (mm) | t (mm) | r (mm) | D1 (mm) | Coating / Grade |
|---|---|---|---|---|---|
| SPGG 050204 | 5 | 2.38 | 0.4 | 2.25 | WV3020K10 |
| SPGG 062004 | 6 | 2.38 | 0.4 | 2.61 | WV3020K10 |
| SPGG 07T308 | 7.94 | 3.97 | 0.8 | 2.85 | WV3020K10 |
| SPGG 090408 | 9.8 | 4.3 | 0.8 | 4.05 | WV3020K10 |
| SPGG 110408 | 11.5 | 4.8 | 0.8 | 4.45 | WV3020K10 |
| SPGG 140512 | 14.3 | 5.2 | 1.2 | 5.75 | WV3020K10 |
| P Steel | M Stainless Steel | K Cast Iron | N Non-ferrous Metals | S Heat-resistant Superalloys and Titanium Alloys |
Replaceable insert for WVU indexable drilling. Select the insert specified for the drill body.
Coated grade listed for WVU inserts.
Uncoated grade listed for SPGG inserts.
Select the model dimensions and grade together with the body or module specification. A shared geometry name does not confirm compatibility across different drilling families.
Include the exact model, required hole diameter and depth, workpiece grade and hardness, machine connection, coolant arrangement and quantity.
Cutting conditions are tied to the stated cutting component, grade, material subgroup and coolant arrangement. Use Vc in m/min and feed in the units shown in the table; confirm the subgroup and setup before use.
| Insert Model | d (mm) | t (mm) | r (mm) | D1 (mm) |
|---|---|---|---|---|
| SPGG 050204 | 5 | 2.38 | 0.4 | 2.25 |
| SPGG 062004 | 6 | 2.38 | 0.4 | 2.61 |
| SPGG 07T308 | 7.94 | 3.97 | 0.8 | 2.85 |
| SPGG 090408 | 9.8 | 4.3 | 0.8 | 4.05 |
| SPGG 110408 | 11.5 | 4.8 | 0.8 | 4.45 |
| SPGG 140512 | 14.3 | 5.2 | 1.2 | 5.75 |
Order accessories against the exact model and installed assembly version. Use the matching table below rather than selecting a screw or key by appearance.
M2.5×6
TORX08-1367
| Drill Body Model | Insert / Grade | Insert Screw | Torx Key |
|---|---|---|---|
| WVU2527R2T25M-SP07 | SPGG 07T308 | M2.5×6 | TORX08-1367 |
| WVU2527R3T25M-SP07 | SPGG 07T308 | M2.5×6 | TORX08-1367 |