WV3010
PSteel
KCast Iron
Compare WVV PG Drill Tips by the model dimensions and available grade information in the tables below. Match the cutting component to its specified WVV body or module; geometry, grade and assembly determine the application.
| Model | D1 (mm) | D1 (in) | Seat | Seat width (mm) | Coating / Grade |
|---|---|---|---|---|---|
| WVTP1500PG | 15 | 0.591 | A | 10.3 | WV3010 |
| WVTP1600PG | 16 | 0.630 | 1 | 11.3 | WV3010 |
| WVTP1700PG | 17 | 0.669 | 1 | 11.3 | WV3010 |
| WVTP1800PG | 18 | 0.709 | 1 | 11.3 | WV3010 |
| WVTP1900PG | 19 | 0.748 | 2 | 12.3 | WV3010 |
| WVTP2000PG | 20 | 0.787 | 3 | 13.3 | WV3010 |
| WVTP2100PG | 21 | 0.827 | 3 | 13.3 | WV3010 |
| WVTP2200PG | 22 | 0.866 | 3 | 13.3 | WV3010 |
| WVTP2300PG | 23 | 0.906 | 4 | 14.3 | WV3010 |
| WVTP2400PG | 24 | 0.945 | 4 | 14.3 | WV3010 |
| WVTP2500PG | 25 | 0.984 | 5 | 15.3 | WV3010 |
| WVTP2600PG | 26 | 1.024 | 5 | 15.3 | WV3010 |
| WVTP2700PG | 27 | 1.063 | 6 | 16.3 | WV3010 |
| WVTP2800PG | 28 | 1.102 | 6 | 16.3 | WV3010 |
| WVTP2900PG | 29 | 1.142 | 7 | 17.3 | WV3010 |
| WVTP3000PG | 30 | 1.181 | 7 | 17.3 | WV3010 |
| WVTP3100PG | 31 | 1.220 | 8 | 18.3 | WV3010 |
| WVTP3200PG | 32 | 1.260 | 8 | 18.3 | WV3010 |
| WVTP3300PG | 33 | 1.299 | 9 | 20.3 | WV3010 |
| WVTP3400PG | 34 | 1.339 | 9 | 20.3 | WV3010 |
| WVTP3500PG | 35 | 1.378 | 9 | 20.3 | WV3010 |
| WVTP3600PG | 36 | 1.417 | 9 | 20.3 | WV3010 |
| WVTP3700PG | 37 | 1.457 | 10 | 22.3 | WV3010 |
| WVTP3800PG | 38 | 1.496 | 10 | 22.3 | WV3010 |
| WVTP3900PG | 39 | 1.535 | 10 | 22.3 | WV3010 |
| WVTP4000PG | 40 | 1.575 | 10 | 22.3 | WV3010 |
| P Steel | M Stainless Steel | K Cast Iron | N Non-ferrous Metals | S Heat-resistant Superalloys and Titanium Alloys |
PSteel
KCast Iron
Select the model dimensions and grade together with the body or module specification. A shared geometry name does not confirm compatibility across different drilling families.
Include the exact model, required hole diameter and depth, workpiece grade and hardness, machine connection, coolant arrangement and quantity.
Cutting conditions are tied to the stated cutting component, grade, material subgroup and coolant arrangement. Use Vc in m/min and feed in the units shown in the table; confirm the subgroup and setup before use.
Application data for the assembled WVV drill system.
| Material | Subgroup | Condition | Minimum | Starting value | Maximum |
|---|---|---|---|---|---|
| P Steel | 1 | S | 115 | 235 | 290 |
| P Steel | 1 | U | 90 | 160 | 215 |
| P Steel | 1 | I | 65 | 100 | 140 |
| P Steel | 2 | S | 90 | 190 | 230 |
| P Steel | 2 | U | 71 | 130 | 170 |
| P Steel | 2 | I | 50 | 80 | 110 |
| P Steel | 3 | S | 90 | 180 | 230 |
| P Steel | 3 | U | 70 | 120 | 170 |
| P Steel | 3 | I | 50 | 70 | 106 |
| P Steel | 4 | S | 90 | 140 | 220 |
| P Steel | 4 | U | 70 | 110 | 160 |
| P Steel | 4 | I | 50 | 80 | 110 |
| P Steel | 5 | S | 90 | 130 | 210 |
| P Steel | 5 | U | 70 | 100 | 150 |
| P Steel | 5 | I | 50 | 70 | 100 |
| P Steel | 6 | S | 70 | 90 | 180 |
| P Steel | 6 | U | 50 | 75 | 120 |
| P Steel | 6 | I | 40 | 60 | 100 |
| M Stainless Steel | 1 | S | 60 | 110 | 135 |
| M Stainless Steel | 1 | U | 40 | 70 | 90 |
| M Stainless Steel | 1 | I | 30 | 50 | 65 |
| M Stainless Steel | 2 | S | 60 | 100 | 135 |
| M Stainless Steel | 2 | U | 40 | 60 | 90 |
| M Stainless Steel | 2 | I | 30 | 50 | 65 |
| M Stainless Steel | 3 | S | 50 | 90 | 135 |
| M Stainless Steel | 3 | U | 40 | 60 | 90 |
| M Stainless Steel | 3 | I | 25 | 40 | 65 |
| K Cast Iron | 1 | S | 90 | 170 | 230 |
| K Cast Iron | 1 | U | 60 | 120 | 160 |
| K Cast Iron | 1 | I | 40 | 70 | 90 |
| K Cast Iron | 2 | S | 90 | 160 | 220 |
| K Cast Iron | 2 | U | 60 | 110 | 160 |
| K Cast Iron | 2 | I | 40 | 70 | 100 |
| K Cast Iron | 3 | S | 90 | 150 | 210 |
| K Cast Iron | 3 | U | 60 | 100 | 150 |
| K Cast Iron | 3 | I | 35 | 60 | 90 |
| N Non-ferrous Metals | 1 | S | 150 | 240 | 360 |
| N Non-ferrous Metals | 1 | U | 100 | 160 | 240 |
| N Non-ferrous Metals | 1 | I | 60 | 100 | 160 |
| N Non-ferrous Metals | 2 | S | 150 | 220 | 360 |
| N Non-ferrous Metals | 2 | U | 100 | 150 | 240 |
| N Non-ferrous Metals | 2 | I | 60 | 100 | 160 |
| N Non-ferrous Metals | 3 | S | 150 | 200 | 360 |
| N Non-ferrous Metals | 3 | U | 100 | 140 | 240 |
| N Non-ferrous Metals | 3 | I | 60 | 90 | 160 |
| N Non-ferrous Metals | 4 | S | 150 | 200 | 360 |
| N Non-ferrous Metals | 4 | U | 100 | 140 | 240 |
| N Non-ferrous Metals | 4 | I | 60 | 90 | 160 |
| N Non-ferrous Metals | 5 | S | 150 | 200 | 360 |
| N Non-ferrous Metals | 5 | U | 100 | 140 | 240 |
| N Non-ferrous Metals | 5 | I | 60 | 90 | 160 |
| N Non-ferrous Metals | 6 | S | 150 | 200 | 360 |
| N Non-ferrous Metals | 6 | U | 100 | 140 | 240 |
| N Non-ferrous Metals | 6 | I | 60 | 90 | 160 |
| N Non-ferrous Metals | 7 | S | 110 | 220 | 260 |
| N Non-ferrous Metals | 7 | U | 70 | 140 | 170 |
| N Non-ferrous Metals | 7 | I | 45 | 90 | 110 |
| S Heat-resistant Superalloys and Titanium Alloys | 1 | S | 25 | 50 | 75 |
| S Heat-resistant Superalloys and Titanium Alloys | 1 | U | 20 | 40 | 60 |
| S Heat-resistant Superalloys and Titanium Alloys | 1 | I | 15 | 30 | 50 |
| S Heat-resistant Superalloys and Titanium Alloys | 2 | S | 20 | 40 | 60 |
| S Heat-resistant Superalloys and Titanium Alloys | 2 | U | 15 | 30 | 45 |
| S Heat-resistant Superalloys and Titanium Alloys | 2 | I | 12 | 25 | 35 |
| S Heat-resistant Superalloys and Titanium Alloys | 3 | S | 20 | 40 | 60 |
| S Heat-resistant Superalloys and Titanium Alloys | 3 | U | 15 | 30 | 45 |
| S Heat-resistant Superalloys and Titanium Alloys | 3 | I | 12 | 25 | 40 |
| S Heat-resistant Superalloys and Titanium Alloys | 4 | S | 20 | 40 | 60 |
| S Heat-resistant Superalloys and Titanium Alloys | 4 | U | 15 | 30 | 45 |
| S Heat-resistant Superalloys and Titanium Alloys | 4 | I | 12 | 25 | 40 |
| Material | Subgroup | Condition | Ø28.00–31.74 mm | Ø31.74–35.99 mm | Ø36.00–44.99 mm | Ø45.00–55.99 mm | Ø56.00–70.30 mm |
|---|---|---|---|---|---|---|---|
| P Steel | 1 | S / U / I | 0.130–0.250 | 0.130–0.250 | 0.160–0.280 | 0.160–0.320 | 0.200–0.360 |
| P Steel | 2 I; 3–6 | S / U / I | 0.160–0.280 | 0.160–0.280 | 0.200–0.320 | 0.200–0.400 | 0.200–0.450 |
| P Steel | 2 | S / U | 0.160–0.280 | 0.160–0.280 | 0.200–0.360 | 0.200–0.400 | 0.200–0.450 |
| M Stainless Steel | 1–3 | S / U / I | 0.130–0.250 | 0.130–0.250 | 0.160–0.280 | 0.160–0.320 | 0.200–0.360 |
| K Cast Iron | 1–3 | S / U / I | 0.180–0.300 | 0.180–0.300 | 0.216–0.360 | 0.240–0.420 | 0.300–0.480 |
| N Non-ferrous Metals | 1–7 | S / U / I | 0.120–0.200 | 0.120–0.200 | 0.144–0.280 | 0.160–0.320 | 0.200–0.400 |
| S Heat-resistant Superalloys and Titanium Alloys | 1–4 | S / U / I | 0.130–0.250 | 0.130–0.250 | 0.160–0.280 | 0.160–0.320 | 0.200–0.360 |
Order accessories against the exact model and installed assembly version. Use the matching table below rather than selecting a screw or key by appearance.
Centre-head screw and key selection by module PDD, matching the centre-head diameter.
M010-B
M011
M012
M013
TH2-45L
TH2.5-45L
TH3-45L
| Centre Head D1 (mm) | Module D1 (mm) | Head Screw | Hex Key |
|---|---|---|---|
| 15 | 32 | M010-B | TH2-45L |
| 16 | 33 | M010-B | TH2-45L |
| 17 | 34 | M010-B | TH2-45L |
| 18 | 35 | M010-B | TH2-45L |
| 15 | 36 | M010-B | TH2-45L |
| 15 | 37 | M010-B | TH2-45L |
| 15 | 37.5 | M010-B | TH2-45L |
| 16 | 38 | M010-B | TH2-45L |
| 18 | 39 | M010-B | TH2-45L |
| 18 | 39.2 | M010-B | TH2-45L |
| 18 | 39.7 | M010-B | TH2-45L |
| 18 | 40 | M010-B | TH2-45L |
| 18 | 41 | M010-B | TH2-45L |
| 19 | 42 | M010-B | TH2-45L |
| 20 | 43 | M011 | TH2-45L |
| 21 | 44 | M011 | TH2-45L |
| 19 | 45 | M010-B | TH2-45L |
| 19 | 46 | M010-B | TH2-45L |
| 20 | 47 | M011 | TH2-45L |
| 22 | 48 | M011 | TH2-45L |
| 22 | 49 | M011 | TH2-45L |
| 23 | 50 | M011 | TH2-45L |
| 24 | 51 | M011 | TH2-45L |
| 25 | 52 | M012 | TH2-45L |
| 26 | 53 | M012 | TH2.5-45L |
| 27 | 54 | M012 | TH2.5-45L |
| 28 | 55 | M012 | TH2.5-45L |
| 22 | 56 | M011 | TH2-45L |
| 22 | 57 | M011 | TH2-45L |
| 20 | 58 | M011 | TH2-45L |
| 21 | 59 | M011 | TH2-45L |
| 22 | 60 | M011 | TH2-45L |
| 22 | 61 | M011 | TH2-45L |
| 19 | 62 | M010-B | TH2-45L |
| 20 | 63 | M011 | TH2-45L |
| 21 | 64 | M011 | TH2-45L |
| 22 | 65 | M011 | TH2-45L |
| 23 | 66 | M011 | TH2-45L |
| 25 | 68 | M012 | TH2.5-45L |
| 26 | 69 | M012 | TH2.5-45L |
| 22 | 70 | M011 | TH2-45L |
| 22 | 71 | M011 | TH2-45L |
| 23 | 72 | M011 | TH2-45L |
| 24 | 73 | M011 | TH2-45L |
| 20 | 74 | M011 | TH2-45L |
| 20 | 75 | M011 | TH2-45L |
| 21 | 76 | M011 | TH2-45L |
| 22 | 77 | M011 | TH2-45L |
| 23 | 78 | M011 | TH2-45L |
| 24 | 79 | M011 | TH2-45L |
| 25 | 80 | M012 | TH2.5-45L |
| 26 | 81 | M012 | TH2.5-45L |
| 22 | 82 | M011 | TH2-45L |
| 23 | 83 | M011 | TH2-45L |
| 24 | 84 | M011 | TH2-45L |
| 25 | 85 | M012 | TH2.5-45L |
| 26 | 86 | M012 | TH2.5-45L |
| 27 | 87 | M012 | TH2.5-45L |
| 28 | 88 | M012 | TH2.5-45L |
| 29 | 89 | M013 | TH3-45L |
| 23 | 90 | M011 | TH2-45L |
| 24 | 91 | M011 | TH2-45L |
| 25 | 92 | M012 | TH2.5-45L |
| 26 | 93 | M012 | TH2.5-45L |
| 21 | 94 | M011 | TH2-45L |
| 22 | 95 | M011 | TH2-45L |
| 23 | 96 | M011 | TH2-45L |
| 24 | 97 | M011 | TH2-45L |
| 25 | 98 | M012 | TH2.5-45L |
| 26 | 99 | M012 | TH2.5-45L |
| 24 | 100 | M011 | TH2-45L |