Insert Screw
FCS9125
FS378
| Model | L10 | D | D1 | S | RE | Screw | Wrench |
|---|---|---|---|---|---|---|---|
| WCMT05-FY | 5.29 | 8.0 | 3.4 | 3.75 | 0.8 | FCS9125 | TORX08-1367 |
| WCMT06-FY | 6.62 | 10.0 | 4.4 | 3.75 | 0.8 | FS378 | TORX15-1367 |
| WCMT07-FY | 7.94 | 12.0 | 4.4 | 4.75 | 0.8 | FS378 | TORX15-1367 |
| P Steel | M Stainless Steel | K Cast Iron | N Non-ferrous Metals | S Heat-resistant Superalloys and Titanium Alloys |
Select the model dimensions and grade together with the body or module specification. A shared geometry name does not confirm compatibility across different drilling families.
Include the exact model, required hole diameter and depth, workpiece grade and hardness, machine connection, coolant arrangement and quantity.
Cutting conditions are tied to the stated cutting component, grade, material subgroup and coolant arrangement. Use Vc in m/min and feed in the units shown in the table; confirm the subgroup and setup before use.
Application data for the assembled WVV drill system.
| Material | Subgroup | Condition | Minimum | Starting value | Maximum |
|---|---|---|---|---|---|
| P Steel | 1 | S | 115 | 235 | 290 |
| P Steel | 1 | U | 90 | 160 | 215 |
| P Steel | 1 | I | 65 | 100 | 140 |
| P Steel | 2 | S | 90 | 190 | 230 |
| P Steel | 2 | U | 71 | 130 | 170 |
| P Steel | 2 | I | 50 | 80 | 110 |
| P Steel | 3 | S | 90 | 180 | 230 |
| P Steel | 3 | U | 70 | 120 | 170 |
| P Steel | 3 | I | 50 | 70 | 106 |
| P Steel | 4 | S | 90 | 140 | 220 |
| P Steel | 4 | U | 70 | 110 | 160 |
| P Steel | 4 | I | 50 | 80 | 110 |
| P Steel | 5 | S | 90 | 130 | 210 |
| P Steel | 5 | U | 70 | 100 | 150 |
| P Steel | 5 | I | 50 | 70 | 100 |
| P Steel | 6 | S | 70 | 90 | 180 |
| P Steel | 6 | U | 50 | 75 | 120 |
| P Steel | 6 | I | 40 | 60 | 100 |
| M Stainless Steel | 1 | S | 60 | 110 | 135 |
| M Stainless Steel | 1 | U | 40 | 70 | 90 |
| M Stainless Steel | 1 | I | 30 | 50 | 65 |
| M Stainless Steel | 2 | S | 60 | 100 | 135 |
| M Stainless Steel | 2 | U | 40 | 60 | 90 |
| M Stainless Steel | 2 | I | 30 | 50 | 65 |
| M Stainless Steel | 3 | S | 50 | 90 | 135 |
| M Stainless Steel | 3 | U | 40 | 60 | 90 |
| M Stainless Steel | 3 | I | 25 | 40 | 65 |
| K Cast Iron | 1 | S | 90 | 170 | 230 |
| K Cast Iron | 1 | U | 60 | 120 | 160 |
| K Cast Iron | 1 | I | 40 | 70 | 90 |
| K Cast Iron | 2 | S | 90 | 160 | 220 |
| K Cast Iron | 2 | U | 60 | 110 | 160 |
| K Cast Iron | 2 | I | 40 | 70 | 100 |
| K Cast Iron | 3 | S | 90 | 150 | 210 |
| K Cast Iron | 3 | U | 60 | 100 | 150 |
| K Cast Iron | 3 | I | 35 | 60 | 90 |
| N Non-ferrous Metals | 1 | S | 150 | 240 | 360 |
| N Non-ferrous Metals | 1 | U | 100 | 160 | 240 |
| N Non-ferrous Metals | 1 | I | 60 | 100 | 160 |
| N Non-ferrous Metals | 2 | S | 150 | 220 | 360 |
| N Non-ferrous Metals | 2 | U | 100 | 150 | 240 |
| N Non-ferrous Metals | 2 | I | 60 | 100 | 160 |
| N Non-ferrous Metals | 3 | S | 150 | 200 | 360 |
| N Non-ferrous Metals | 3 | U | 100 | 140 | 240 |
| N Non-ferrous Metals | 3 | I | 60 | 90 | 160 |
| N Non-ferrous Metals | 4 | S | 150 | 200 | 360 |
| N Non-ferrous Metals | 4 | U | 100 | 140 | 240 |
| N Non-ferrous Metals | 4 | I | 60 | 90 | 160 |
| N Non-ferrous Metals | 5 | S | 150 | 200 | 360 |
| N Non-ferrous Metals | 5 | U | 100 | 140 | 240 |
| N Non-ferrous Metals | 5 | I | 60 | 90 | 160 |
| N Non-ferrous Metals | 6 | S | 150 | 200 | 360 |
| N Non-ferrous Metals | 6 | U | 100 | 140 | 240 |
| N Non-ferrous Metals | 6 | I | 60 | 90 | 160 |
| N Non-ferrous Metals | 7 | S | 110 | 220 | 260 |
| N Non-ferrous Metals | 7 | U | 70 | 140 | 170 |
| N Non-ferrous Metals | 7 | I | 45 | 90 | 110 |
| S Heat-resistant Superalloys and Titanium Alloys | 1 | S | 25 | 50 | 75 |
| S Heat-resistant Superalloys and Titanium Alloys | 1 | U | 20 | 40 | 60 |
| S Heat-resistant Superalloys and Titanium Alloys | 1 | I | 15 | 30 | 50 |
| S Heat-resistant Superalloys and Titanium Alloys | 2 | S | 20 | 40 | 60 |
| S Heat-resistant Superalloys and Titanium Alloys | 2 | U | 15 | 30 | 45 |
| S Heat-resistant Superalloys and Titanium Alloys | 2 | I | 12 | 25 | 35 |
| S Heat-resistant Superalloys and Titanium Alloys | 3 | S | 20 | 40 | 60 |
| S Heat-resistant Superalloys and Titanium Alloys | 3 | U | 15 | 30 | 45 |
| S Heat-resistant Superalloys and Titanium Alloys | 3 | I | 12 | 25 | 40 |
| S Heat-resistant Superalloys and Titanium Alloys | 4 | S | 20 | 40 | 60 |
| S Heat-resistant Superalloys and Titanium Alloys | 4 | U | 15 | 30 | 45 |
| S Heat-resistant Superalloys and Titanium Alloys | 4 | I | 12 | 25 | 40 |
| Material | Subgroup | Condition | Ø28.00–31.74 mm | Ø31.74–35.99 mm | Ø36.00–44.99 mm | Ø45.00–55.99 mm | Ø56.00–70.30 mm |
|---|---|---|---|---|---|---|---|
| P Steel | 1 | S / U / I | 0.130–0.250 | 0.130–0.250 | 0.160–0.280 | 0.160–0.320 | 0.200–0.360 |
| P Steel | 2 I; 3–6 | S / U / I | 0.160–0.280 | 0.160–0.280 | 0.200–0.320 | 0.200–0.400 | 0.200–0.450 |
| P Steel | 2 | S / U | 0.160–0.280 | 0.160–0.280 | 0.200–0.360 | 0.200–0.400 | 0.200–0.450 |
| M Stainless Steel | 1–3 | S / U / I | 0.130–0.250 | 0.130–0.250 | 0.160–0.280 | 0.160–0.320 | 0.200–0.360 |
| K Cast Iron | 1–3 | S / U / I | 0.180–0.300 | 0.180–0.300 | 0.216–0.360 | 0.240–0.420 | 0.300–0.480 |
| N Non-ferrous Metals | 1–7 | S / U / I | 0.120–0.200 | 0.120–0.200 | 0.144–0.280 | 0.160–0.320 | 0.200–0.400 |
| S Heat-resistant Superalloys and Titanium Alloys | 1–4 | S / U / I | 0.130–0.250 | 0.130–0.250 | 0.160–0.280 | 0.160–0.320 | 0.200–0.360 |
Order accessories against the exact model and installed assembly version. Use the matching table below rather than selecting a screw or key by appearance.
FCS9125
FS378
TORX08-1367
TORX15-1367
| Insert Model | Insert Screw | Torx Key |
|---|---|---|
| WCMT05-FY | FCS9125 | TORX08-1367 |
| WCMT06-FY | FS378 | TORX15-1367 |
| WCMT07-FY | FS378 | TORX15-1367 |